Skip to main content

Transport

The system was preassembled and tested at the factory. For transport, the system has been disassembled into units as required.

To prevent injuries and property damage during transport and installation, please observe the following:

  • Transport and installation may only be performed by qualified and authorized personnel.
  • Load-handling devices and lifting slings must comply with the provisions of the accident prevention regulations.
  • When selecting load-bearing devices and lifting slings, take the weight of the system components into account (see Technical data).
  • Transport routes must be of sufficient capacity. Doorways or gateways must be at least 5 cm wider and taller than the transport unit, including the means of transport.
  • Have a third person secure the route.

The best and fastest installation is guaranteed if you follow the installation procedure described.

The following chapters provide an overview of the steps required for transporting and installing the system.

Safety instructions for transport and installation​

  • All work on electrical systems may only be performed by licensed electricians.
  • These installation instructions are not a substitute for the necessary training of qualified personnel.