Skip to main content

Installing the system

Install the system at the designated location, taking the following conditions into account.

  • ✓ All legal requirements must be clarified on site and compliance with them must be ensured.
  • ✓ The ground conditions and space requirements must be assessed before installing the system to ensure the long-term safe operation of the system and the safety of the personnel.
  • ✓ The system may only be installed, commissioned and/or stored by specially trained personnel.
  • ✓ Drives must be inspected and may only be installed if no damage or leaks are visible.
  • ► Set up the system according to the installation diagram.
  • ► When setting up the system, make sure there is sufficient open space around it for maintenance and repair work.

Installation notices​

The system may only be installed by trained and authorized personnel.

CAUTION

Watch out for obstacles on the ground

If you are not careful, there is a risk of injury from tripping.

► Pay special attention to obstacles on the ground.

► Avoid creating tripping hazards when laying cables, hoses and pipes.

► Use appropriate cable trays, bridges, etc.

Preventing noise and vibration

Install the system so that noise and vibration levels are kept as low as possible during operation.