Skip to main content

Assembly Instructions Robot

Version 1.1 • 8/7/2026

These installation instructions (hereinafter referred to as "the instructions") enable the integrator and the operator to work safely with the modular robot system (hereinafter referred to as "the system" or "the robot"). It describes the partly completed machine manufactured by RobCo GmbH (hereinafter referred to as RobCo).

  • Read the instructions carefully.
  • Follow all safety notices.
Read the safety chapter first

The system is a partly completed machine. It may not be put into service until it has been determined that the machine or system into which it has been installed complies with the provisions of the Machinery Directive (2006/42/EC). See Safety.

Contents​

  • About these assembly instructions — purpose of the instructions, the symbols and conventions used, change history and contacts.
  • Product description — the system and its components, the safety functions, scope of supply and technical data.
  • Safety — responsibilities, general safety notices, prohibited operating states, personnel qualifications and personal protective equipment.
  • Transport — anchor points and transporting the system.
  • Mechanical installation — tools, unpacking, installation site, installing the modules and the final inspection.
  • Electrical installation — grounding, mains connection, the I/O terminal blocks and the final inspection.
  • Commissioning — checking the safety devices, initial startup, daily commissioning and commissioning after storage.
  • Operation — activation and deactivation sequence and the process flow.
  • Malfunctions — triggering and resetting the emergency stop, restarting and troubleshooting.
  • Maintenance and inspection during operation — the maintenance schedule, the maintenance work and spare parts.
  • Repair — who is authorized to repair the system.
  • Decommissioning, storage and disposal — taking the system out of service, storing it and disposing of it.

Reference material: List of figures, List of tables, Glossary and Index.

Imprint​

RobCo GmbH

Augustenstraße 12

D-80333 München

Phone: +49 89 944 240 76

E-mail: info@robco.de

https://www.rob.co

RobCo GmbH holds the copyright to this document.

The distribution, reproduction, and storage of this document, as well as the use and disclosure of its contents, are prohibited unless expressly authorized in writing by RobCo GmbH.

Violations may result in liability for damages.

All rights reserved in the event of a patent grant or utility model registration.

All product names mentioned in this manual are trademarks of their respective companies.

Subject to technical changes.

This guide was created by dokupartner, http://www.dokupartner.de.